Epoxy Paint

Product Details:

SURFACE PREPARATION Remove grease, oil and other contaminants preferably using degreasing solvent. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. HEALTH & SAFETY All work involving the application and use of this product should be performed in compliance with all relevant National Health, Safety & Environmental standards and regulations. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. If you do not fully understand these warnings and instructions or if you cannot strictly comply with them, do not use this product. Proper ventilation and protective measures must be provided during applying and drying to keep solvent vapor concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Actual safety measures are dependent on application methods and work environment. This is a PAGE 3 solvent based paint and care should be taken to avoid inhalation of spray mist or vapor as well as contact between the wet paint and exposed skin or eyes. APPLICATION METHOD 1. Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio of 4 : 1 by volume. Stir & mix thoroughly to attain homogeneity. 2. Add thinner into the mix, if required, depending on application method, and stir thoroughly for few minutes. 3. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. 4. Good ventilation is usually required in confined areas to ensure correct drying. 5. All equipment used for above should be properly cleaned. 6. Do not allow material to remain in hoses, gun or spray equipment. Application: By Brush/By Air Spray/By Airless Spray For Brush application, a maximum of 5% thinner, if required, is to be added. Apply uniformly in crisscross manner and ensure there are no misses. Use quality brushes for paint application. Recommended Thinner: AK-579 For Air spray application: 10-15% For Airless spray application: Max 5% Nozzle Orifice: 1 .2 -1 .4 mm for air spray and Nozzle Orifice: 0.28 mm for airless spray. Nozzle Pressure: 40-70 p.s.i for air spray and Nozzle Pressure: 1400-1800 psi for airless spray.

Additional Information:

• Production Capacity: 2000 ltr per day
• Delivery Time: 3 days
• Packaging Details: 20 ltr

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-604
• Production Capacity: 1500 LITER /DAY
• Delivery Time: 3/4 DAYS
• Packaging Details: Wall paint/primer is a two-in-one product that combines paint and primer functions. It saves time and effort by providing priming and painting in one application. Creates a smooth surface and enhances paint adhesion. Available in various finishes for interior and exterior walls. Commonly used in homes, offices, and commercial spaces for efficient painting. Proper surface preparation is essential for the best results. Offers convenience and effectiveness in one product.

Product Details:

High-performance epoxy paint designed for industrial, commercial, and residential applications. It offers excellent adhesion and durability, providing a tough, glossy finish that resists chemicals, abrasion, and impact. Ideal for use on concrete, metal, and wood surfaces, ensuring long-lasting protection and a professional appearance.

Additional Information:

• Item Code: 3209
• Production Capacity: 1500 LTR PER DAY
• Delivery Time: 10 DAYS
• Packaging Details: High build epoxy finishing paint is a durable coating known for its thick film and excellent adhesion. It is commonly used in industrial settings, infrastructure, flooring, and marine environments. The paint provides a smooth and glossy finish and requires proper surface preparation and maintenance for optimal performance.

Product Details:

Red Oxide Zinc Chromate Primer is a type of primer used for the protection of metal surfaces, particularly steel and aluminum. It combines red iron oxide pigment with zinc chromate, offering both corrosion resistance and adhesion-promoting properties. Here's some information about Red Oxide Zinc Chromate Primer:

1. Composition:

   • Red Oxide Zinc Chromate Primer typically contains red iron oxide pigment for color and corrosion protection. Zinc chromate is added to enhance adhesion and provide additional corrosion resistance.

2. Corrosion Protection:

   • The primer is formulated to provide effective corrosion protection to metal surfaces. Zinc chromate is known for its ability to inhibit corrosion, especially on aluminum surfaces.

3. Adhesion Promotion:

   • Zinc chromate is a corrosion inhibitor and acts as a primer in itself by promoting adhesion between the metal substrate and the coating system. This enhances the overall durability of the paint or coating applied over it.

4. Surface Preparation:

   • Proper surface preparation is crucial for the effectiveness of the primer. The metal surface should be clean, dry, and free from rust, mill scale, and other contaminants before applying Red Oxide Zinc Chromate Primer.

5. Application Methods:

   • Red Oxide Zinc Chromate Primer can be applied using various methods, including brushing, spraying, or rolling. The choice of application method may depend on the product and the surface being coated.

6. Color and Finish:

   • The primer has a red color due to the iron oxide pigment, and the addition of zinc chromate may impart a yellowish tint. The finish is typically flat or matte.

7. Compatibility:

   • Red Oxide Zinc Chromate Primer is compatible with a variety of topcoats, including oil-based and latex paints. It serves as a bonding layer between the metal substrate and the final finish.

8. Drying Time:

   • Drying times for Red Oxide Zinc Chromate Primer can vary based on the formulation and environmental conditions. It is essential to follow the manufacturer's guidelines regarding drying times for optimal results.

9. UV Resistance:

   • While zinc chromate provides some level of UV resistance, it may not be sufficient for prolonged exposure to sunlight. For extended UV exposure, additional UV-resistant topcoats may be recommended.

10. Application Areas:

    • Red Oxide Zinc Chromate Primer is commonly used in applications where both corrosion resistance and adhesion promotion are essential. This includes steel structures, automotive components, and other metal surfaces.

11. Environmental Considerations:

    • Zinc chromate has been associated with environmental and health concerns due to its heavy metal content. In response, alternative formulations with less toxic or non-chromate corrosion inhibitors have been developed.

12. Testing and Certification:

    • Some Red Oxide Zinc Chromate Primers may undergo testing and certification to ensure they meet industry standards for corrosion resistance, adhesion, and environmental safety. Look for products with recognized certifications.

Before applying Red Oxide Zinc Chromate Primer, carefully read and follow the manufacturer's guidelines, including any recommendations for surface preparation, application methods, and compatibility with topcoats. Proper application and adherence to recommended procedures are essential for achieving effective corrosion protection and adhesion promotion on metal surfaces.

Additional Information:

• Item Code: REC-111
• Production Capacity: 2500 LTR PER DAY
• Delivery Time: 3 DAAYS
• Packaging Details: 1,4,10,20, LTR

Product Details:

Acid resistant paint is a specialized protective coating designed to withstand exposure to harsh chemicals, particularly acidic substances, without degrading or losing adhesion. It forms a tough, impermeable barrier on surfaces such as concrete, steel, and masonry, preventing corrosion, staining, and structural damage caused by acids, alkalis, and solvents. Commonly used in industrial environments like chemical plants, laboratories, wastewater treatment facilities, and battery rooms, this type of paint ensures long-term durability and safety in corrosive conditions. Acid resistant paints are typically based on epoxy, polyurethane, or chlorinated rubber resins, offering excellent chemical resistance, abrasion resistance, and adhesion. They are available in various finishes and colors and can be applied using brush, roller, or spray methods. Some formulations are also resistant to high temperatures and UV exposure. By protecting surfaces from chemical attack, acid resistant coatings help reduce maintenance costs, prolong equipment lifespan, and improve operational safety in demanding industrial and commercial settings.

Additional Information:

• Item Code: RP-604.1
• Production Capacity: 20000 ltr per mant
• Delivery Time: 3 to 4 days
• Packaging Details: 20000 ltr per manth

Product Details:

•  all are the best product provied 
•  all the product is lab tested 
•  rudra paint allways safley you have to product deliverd 
•  all the prodouct in 3/4 days in you have to deliverd 
•  your product deliverd for your payment complete

Additional Information:

• Production Capacity: 1000 ltr pear day
• Delivery Time: depending upon order
• Packaging Details: Epoxy primer coating paint is a durable and corrosion-resistant paint used as a primer on various surfaces. It improves adhesion, provides a stable base, and offers enhanced protection against corrosion. Widely used in automotive, industrial, marine, and construction applications, it dries quickly, requiring proper surface preparation for optimal performance.

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-308
• Production Capacity: 1500 - DAY
• Delivery Time: 3/4 DAYS
• Packaging Details: High build epoxy finish coating, cured with polymine, is a durable and versatile protective coating. It forms a thick film, offering excellent protection and adhesion on various surfaces. Commonly used in industrial, infrastructure, flooring, and marine applications, it is known for its durability and chemical resistance. Proper curing and maintenance are essential for long-lasting effectiveness.

Product Details:

RECOMMENDED USE Recommended as a top coat for maintenance coatings in chemical and fertilizer industries, pharmaceutical complexes, refineries, bulk storage tanks, plants, pharmaceutical plants, automotive plants etc. This can be used in original equipment coating, floor coating and hygienic wall coating. 
SURFACE PREPARATION Remove grease, oil and other contaminants preferably using degreasing solvent. Excessive burnishing of steel is to be avoided. Thoroughly dust down all surfaces. HEALTH & SAFETY All work involving the application and use of this product should be performed in compliance with all relevant National Health, Safety & Environmental standards and regulations. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels.If you do not fully understand these warnings and instructions or if you cannot strictly comply with them, do not use this product. Proper ventilation and protective measures must be provided during applying and drying to keep solvent vapor concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Actual safety measures are dependent on application methods and work environment. This is a solvent based primer and care should be taken to avoid inhalation of spray mist or vapor as well as contact between the wet paint and exposed skin or eyes. APPLICATION METHOD 1. Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio of 4 : 1 by volume. Stir & mix thoroughly to attain homogeneity. 2. Add thinner into the mix, if required, depending on application method, and stir thoroughly for few minutes. 3. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. apply uniformly over the surface. 4. All equipment used for above should be properly cleaned. Application: By Brush/By Air Spray/By Airless Spray For Brush application, a maximum of 5% thinner, if required, is to be added. Use quality brushes for paint application For Air spray application: 10-15% For Airless spray application: Max 5% Nozzle Orifice: 1 .2 -1 .4 mm for air spray and Nozzle Orifice: 0.28 mm for airless spray. Nozzle Pressure: 40-70 p.s.i for air spray and Nozzle Pressure: 1400-1800 psi for airless spray.

Additional Information:

• Production Capacity: 1500 ltr per day
• Delivery Time: 3 days
• Packaging Details: 20 ltr

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-602
• Production Capacity: 1500 LTR /DAYS
• Delivery Time: 3/4 DAYS
• Packaging Details: Solvent-free anti-corrosive paint is a type of protective coating that contains no solvents or volatile organic compounds (VOCs). It is designed to prevent corrosion and rust formation on metal surfaces. The absence of solvents makes it more environmentally friendly and safer to use. This type of paint is applied directly to the metal surface and forms a barrier that protects it from moisture and atmospheric exposure, extending the lifespan of the metal and reducing maintenance needs.

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-602.
• Production Capacity: 1500
• Delivery Time: 3/4 DAYS
• Packaging Details: Zinc-rich primer is a protective coating with high zinc concentration that creates a sacrificial layer, preventing rust on metal surfaces. Used in industrial, marine, and steel applications. It acts as a barrier, corroding sacrificially instead of the metal substrate. Ideal for harsh environments like bridges and offshore platforms. Applied through spray, brush, or roller methods. Provides a solid base for topcoats and additional coatings. Proper surface preparation and maintenance are crucial. Highly effective for extending the life of steel structures.

Product Details:

**Marine Paints**  
Marine paints are specialized coatings designed to protect ships, boats, and offshore structures from harsh marine environments. These paints provide resistance against saltwater, UV radiation, algae, and corrosion, ensuring durability and extending the lifespan of marine vessels.  
There are various types of marine paints, including antifouling paints, which prevent the growth of barnacles and algae on hulls, and epoxy-based paints, which offer excellent water resistance and adhesion. Other types include enamel, polyurethane, and zinc-based coatings, each serving different protective functions.  
Marine paints are formulated to withstand extreme weather conditions, including constant water exposure and temperature fluctuations. They also improve fuel efficiency by reducing drag on vessel hulls. Proper surface preparation and application techniques are essential for maximum effectiveness.  
With advancements in technology, eco-friendly marine paints with reduced toxic emissions are becoming more popular, ensuring environmental safety while maintaining high-performance standards in marine protection.

Additional Information:

• Item Code: RP-407.
• Production Capacity: 10000 LTR
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: METAL DRUM

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-309
• Production Capacity: 1500- DAY
• Delivery Time: 3/4 DAYS
• Packaging Details: Solvent-less epoxy coating, cured with polymine, is an environmentally friendly and durable protective coating made from epoxy resins. It lacks volatile organic compounds (VOCs) and is used in various industries, offering excellent adhesion, chemical resistance, and protection against abrasion and moisture. Proper surface preparation and maintenance are essential for optimal performance.

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-311
• Production Capacity: 1500
• Delivery Time: 3/4 DAYS
• Packaging Details: The self-priming surface-tolerant high build epoxy coating, cured with polymine, is a versatile and durable protective coating used on various surfaces. It acts as both a primer and topcoat, adheres well to different substrates, and forms a thick film for excellent protection. Made from epoxy resins, it offers superior adhesion and chemical resistance. Commonly used in industrial, marine, and infrastructure applications, regular maintenance ensures its long-lasting effectiveness.

Product Details:

RECOMMENDED USE: Recommended as an intermediate coat for suitably cleaned MS,GI, Aluminum surface in OEM equipment painting as well as an anti-corrosive primer in Process industries like fertilizer plants, Refineries, Petrochemical complexes for protection of steel pipelines and structures from corrosion. Also the primer withstands high chemical resistance and it is recommended for highly saline atmospheres.

Additional Information:

• Production Capacity: 1500 per day
• Delivery Time: 5 days
• Packaging Details: 20 ltr

Product Details:

• all are the best product provied 
• all the product is lab tested 
• rudra paint allways safley you have to product deliverd 
• all the prodouct in 3/4 days in you have to deliverd 
• your product deliverd for your payment complete

Additional Information:

• Item Code: RP-412
• Production Capacity: 1500 LTR /DAYS
• Delivery Time: 3/4 DAYS
• Packaging Details: Zinc galvanized paint is a protective coating containing zinc particles that prevent rust and corrosion on metal surfaces. It's used in construction, automotive, and manufacturing to shield against moisture and harsh weather. The paint is applied through spray, brush, or dip methods, forming a long-lasting layer that serves as a base for additional finishes if needed.

Product Details:

**Anti-Magnetic Coating Specification**
Anti-magnetic coating is designed to protect sensitive components and instruments from magnetic interference, which can affect performance and accuracy. Typically composed of non-ferrous materials or specialized polymers with magnetic shielding properties, the coating is applied to surfaces of devices used in medical, aerospace, electronic, and precision engineering fields. It should provide effective shielding against both static and dynamic magnetic fields, ideally up to 60 dB attenuation at 1 MHz and beyond, depending on application requirements. The coating must adhere strongly to various substrates like metal, plastic, and composite materials, offering durability, corrosion resistance, and environmental stability. Standard application methods include spraying, dipping, or brushing, followed by curing at room temperature or under controlled heat. The coating should comply with industry standards such as MIL-DTL-46027 for magnetic shielding materials, ensuring reliability and performance. Regular testing for permeability and attenuation efficiency is recommended for quality assurance.